john deere round baler serial number lookup

John Deere Section Control and the GreenStar™ Rate Controller allows operators to combine what used to be multiple operations into one, allowing such tasks to be completed simultaneously during a single field pass. Inputs such as seed, fertilizers, pesticides, and fuel seem to increase every year.įor these reasons and others, many producers strive to minimize the number of passes taken through the field and attempt to make one pass count. Attachment BE23828 is for 1.22-m (4-ft) machines and BE23829 is for 1.52-m (5-ft) machines.Regardless of operation type, producers have endured rising input costs each year. It offers the starter roll-scraper knife but does not include the staggered roll-auger kit. This kit does not include the same components that are on the silage-configuration balers. Attachment BE32442 is for 1.22-m (4-ft) wide machines and BE32443 is for1.52-m (5-ft) wide machines.Īlso offered is a high-moisture kit. The silage kit is offered as a bundle for field installation if the baler is not ordered as a silage-configuration machine from the factory.

The knife/scraper is mounted in front of the starter roll to help prevent wrapping of wet crop on the starter roll. The screen is bolted on the front of the baler as a safety feature. The powered auger sits above the staggered roll on the baler to help keep wet hay from traveling up the belts and reduce buildup on the roll. There are three major components to a silage configuration baler: a staggered roller-auger kit (1), a starter roll-scraper knife, and a screen (2). A silage configuration machine does not offer a precutter. The compressor rack can be adjusted upward or downward to match the volume of material in the windrow and can be easily removed to match crop conditions.Ī silage-configuration baler allows the producer to put up silage hay. Standard on regular pickups, compressor rods are contoured to control hay over the pickup radius for positive feeding. The closely-spaced pickup teeth extend to the baler side sheets to help build straight-edged bales. Side flares prevent hay from blowing off of the pickup ends, which reduces hay loss.

Low-profile pickup minimizes hay lift to reduce chaffing and retain hay quality.

Feeds hay directly to the forming chamber to reduce crop loss.Handles large, heavy windrows of hay and high-moisture crops.The small-diameter, low-profile pickup allows for good ground gauging and clean crop retrieval. 550M and 560M Baler pickups are 156 cm (61.4 in.) wide.Mounted in front of the baler wheels and directly below the bale chamber, the pickup hugs the ground for clean crop retrieval. Regular pickup on 450E Baler with converging wheels

John deere round baler serial number lookup